TSRC Series | Space Temperature Sensor
The TSRC series of room temperature sensors incorporates a precision platinum or nickel RTD or NTC thermistor in an attractive wall mount enclosure. The universal back plate can be mounted directly to several electrical box styles or directly on any wall. |
|
TSPC Series | Space Temperature Sensor w/ Setpoint Adjustment & LCD
The TSPC room temperature sensor with resistive setpoint control is available in an attractive wall mount enclosure and can be configured with various options. It is available with curve-matched thermistors or RTD sensors to meausre temperature. |
|
TE200 | Space Temperature Sensor
The TE200 Series space temperature sensors are available in a wide selection of enclosures with a variety of options including LCD, setpoint adjustment and push button override capabilities. |
|
TE200 | Probe Sensors
The TE200 Series temperature sensors offer a choice of precision platinum RTD's, IC's, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system. |
|
TXRC Series | Space Temperature Transmitter
The TXRC series room temperature transmitter is a precision current loop transmitter. It utilizes the platinum RTD and is available in various configurations. The transmitter provides a high accuracy signal with excellent long term stability, low hysteresis and fast response while being virtually immune to power supply noise and input voltage fluctuations. All models operate on a wide range of AC or DC power supplies. |
|
TE500 | Space Temperature Sensor
The TE500 Series space temperature transducers are available in a wide selection of enclosures with a variety of options including LCD, setpoint adjustment and push button override capabilities. |
|
TE500 | Probe Sensors
The TE500 Series temperature transducers offer a precision platinum RTD w/ an analog output transducer which can be interfaced with a computerized monitoring or control system. |
|
TE511/512 | Temperature Sensor/Transducer c/w LCD Readout
The newest line of temperature sensor / transducer featuring an on board or remote mounted transmitter display in two unique optional housings. |
|
Temp Misc | Options
Immersion wells, assemblies and enclosures. |
|
LLC Series | Frost Protection Thermostat
The LLC series frost protection thermostats provide a switched output based on the average temperature detected along a six meter (20 foot) capillary sensor. |
|
RPC Series | Room Pressure Monitor
The RPC series Room Pressure Monitor is used to measure differential pressure between 2 rooms in the range of 0.125 to 1" wc or 30 to 250 Pa and provide either an analog or BACnet compatible output, alarm relays outputs, and LCD display of the room pressure. |
|
PGS100A | Gauge
Pressure Transducers
Gauge pressure transducers for a variety of applications. |
|
LP3 Series | Low
Pressure Transducers
Low pressure transducers can be used to measure positive, negative or differential pressure in the ranges of 1 to 20" WC. |
|
ULP Series | Ultra Low
Pressure Transducers
Low pressure transducers can be used to measure positive, negative or differential pressure in the ranges of 0.125 to 1" WC. |
|
GFS Series | DIFFERENTIAL PRESSURE SWITCH
Adjustable Airow Switch with Setpoint Indication. |
|
WP Series | Gauge/Differential Liquid
Pressure Transducers
Compatible with a wide range of liquids and gases. Suitable for high shock & vibration applications. |
|
WPR Series | Remote Sensor Gauge/Differential Liquid
Pressure Transducers
Compatible with a wide range of liquids and gases. Suitable for high shock & vibration applications. |
|
WPS Series | Liquid Static/Differential Pressure Switch
The WPS Series pressure switch is a cost efective pressure monitoring solutions for liquids and non aggressivegases. |
|
PROBES & ACC |
RPV - SS Pick-Up Port CPV - Continental ABS Pick-Up Port OPV - Outside Pick-Up Port FPP & SPP Series - Pitot Tube DPFS Series - Differenttial Pressure Probe MP Series - Differential Pressure Probes AA-1 - Remote Audible Alarm |
|
SPC Series | Humidity/Temperature Transducer
The Microprocessor Based Humidity/Temperature Transducer feature user friendly push button setpoint adjustments for both RH and Temperature, Manual Override and LCD display of humidity, temperature and setpoint. |
|
HRC Series | HRC Series Humidity Transducer
The HRC Series room humidity transmitter uses a highly accurate and field-proven RH sensor in an attractive, low profile enclosure to monitor room relative humidity levels. Additional options are available. The RH output can be field selected as linear 4-20 mA, 0-5 or 0-10 Vdc signal | |
RH100/200/300 | Humidity Transmitter with Temperature Sensor
The RH Series transducers are intended specifically for use in environmental monitoring and control systems and comes in a variety of enclosures. |
|
RH100S | S/S Surface Humidity Transmitter with Temperature Sensor
The RH100S Stainless Steel Wall Plate Hunmidity unit uses a field-proven capacitive type humidity sensor and microprocessor temperature compensation for reliable, accurate measurement of indoor humidity. |
|
HTRC Series | HTRC Series Humidity/Temperature Transducer
The HTRC Humidity/Temperature transmitter incorporates two sensors in one attractive wall mount enclosure for the most efficient environmental monitoring and control system. It uses a field-proven RH sensor to monitor relative humidity and a curve-matched thermistor to measure temperature and provide two analog outputs of either 4-20 mA, 0-5 Vdc or 0-10 Vdc. | |
RH110/210/310 | Humidity Transmitter c/w Temperature Transmitter
Similar to the RH100/200/300, these units come with an optional temperature transmitter that can be ordered with different outputs and temperature ranges. |
|
ESF-35-2 | Air
Flow Transducer
ESF is an airflow transducer with a broad application area. It can be used for control, surveillance, and regulation of the flow rate in fresh-air and ventilation systems, etc. |
|
PS | Regulated
DC Power Supplies
120 and 24 VAC input/DC outputs, adjustable voltage outputs and fuse protected. |
|
325/425/500 Series | AC
Current Switches
Adjustable current-operated Solid-State relays for switching AC or DC circuits. |
|
600 Series | AC
Current Sensors
Solid-State sensors for monitoring AC circuits |
|
CS-425-HC | AC
High Current Switches
Directly control AC loads, such as relays, lamps or fans, in response to the current of a monitored AC circuit |
|
CSR-112 CSR-124 |
Command
Relay
Command Relays are line voltage relays for use with the CS and SC current sensors and switches or as stand-alone devices. |
|
CVT-100 | CT/PT Input Transducers
Power consumption monitoring and overload detection. |
|
Accessories | Power Accessories
Split Core Current Transformer model 601T, Solid Core Current Transformer model RL, and model A3504 Switch. |
|
ETP-9500 | Electronic
to Pneumatic Transducer
This unit installs between the controller and a pneumatic device. It offers a low cost alternative for retrofit or new construction installations. It is available in 4-20ma and 0-10vdc 2wire or 3 wire versions, with or without an enclosure. |
|
GT-AI420 | Loop-powered Analog Input with Optical Isolation to Analog Output | |
GT-AI | Analog Input with Optical Isolation to Analog Output (Re-scales & Limits Output) | |
GT-AR2 GT-AR4 |
Analog to Two or Four High and Low Trip Level Relay Outputs | |
GT-ARES | Analog to Resistance Output | |
GT-ASM | Analog Current or Voltage Rescaling Module | |
CDD | CO2
Detector
Environmental, industrial and commercial indoor Carbon Dioxide (CO2) gas detector. Available in both space and duct mount versions. |
CDD3 CDD4 CDD5 |
CE | CO2
Detector
The CE series uses a highly accurate and reliable non-dispersive infrared (NDIR) sensor in an attractive, wall or duct mount enclosure to monitor return air CO2 levels for indoor applications. |
CE |
CHT | CO2
Detector
The CO2/RH/T transmitter incorporates three sensors in one duct mount enclosure for the most efficient environmental monitoring and control system. |
CHT |
CMD | CO
Detector
Environmental, industrial and commercial indoor Carbon Monoxide (CO) gas detector. Available in both a space and duct mount version. |
|
AIR-300 | Air
Quality Monitor
The AIR-300 is a microprocessor based air quality monitor/controller sensitive to a wide variety of air pollutants. |
|
DES-100 | Damper
End Switch
The damper position switch is a mechanically activated electrical switch which provides accurate and reliable indication of damper blade position. |
|
PSR | Light
Sensor
The PSR-1 is a Light Sensitive Resistor that may be used as an input to indicate the presence of light at the sensor location. |
|
LPI | Loop
Powered Indicator
LPI-1 loop powered indicators with large 3 1/2 digit LCD are designed to display any 4 to 20mA signal directly in the engineering units of the measured media. |
|
WD100 | Water
Detector
The WD100 is a microchip-based device that uses gold-plated sensing probes to detect the presence of water or other conductive liquid. |
|
LY & MY Series | General Pupose Relays
LY and MY series general purpose relays. |